CPA Aluminized NXP 850 Series Kiln Suits

The Aluminized NXP Kiln Suit KL850-XB from Chicago Protective Apparel. CPA's 850 Series Kiln Suits offer unparalleled radiant and thermal protection from fire and heat. They are insulated to protect personnel working in close Kiln to extreme temperatures or fire, and for use in maintenance operations such as hot ovens or kilns. Made with Z-Flex™, the aluminized outer shell and aluminized vapor barrier layer protect workers from high pressure steam, vapor, chemicals, and radiant temperatures to 2000°F (1093°C). The 850 Series Suit can be used in emergency operations, and has 6 layers of protection, including three layers of bulk insulation. It is designed to be used in ambient temperatures to 800°F (280°C).

Complete set includes: Hood, Coat, Pants, Boots, Mitts, and Foot Locke Box or Duffle Bag for storage. Also available in one piece coverall style.

750 and 850 Series Suits Features:

• Aluminized Zetex® outer shell reflects 90% of radiant heat.
• Aluminized vapor barrier layer protects against steam, vapor, and chemicals.
• Layers of 1-inch fiberglass insulation for ambient heat protection.
• Fire resistant vapor barrier lining (750 Series) or fire resistant cotton
inner lining (850 Series) for comfort.
• 1" insulated wooden soles (850 Series) for protection from hot floors.
• Complete set with Hood, Coat, Pants, Boots, Mitts, and Foot Locker
Box or Duffle Bag for storage. Also available in one piece coverall style.
• Made from inorganic Zetex® materials, which meet UL 214/NFPA 701, MIL-C-20079, MIL-I-24244, NRC 1.36, and European BS EN407

Weight of 850 Suit Series: 43 lbs (19.5 Kg)

Foot Locker Box Dimensions: 34" x 19" x 21"

Duffle Bag Dimensions: 40" x 18" x 20"

Note: The use of a Breathing Apparatus set is required for the 850 Series Suit and
recommended for the 750 Series Suit.

*N/A indicates suit is not designed for the specified use. For example, the 150 Series is not designed for Total Flame/Fire Entry.

Breathing apparatus is required for the Kiln and Entry suits, and is optional for the Proximity and Approach suits. CPA, however, recommends that Proximity suits be ordered with breathing apparatus accommodation. ALWAYS have two people suited with Fire Entry, Kiln and Proximity suits to work in relays and to aid each other.

Personnel should wear fire resistant garments under the suit, including long sleeved shirt and full-length pants. See our "Related Products" section at the bottom of this page.

Suit sizing is based on the physical measurements of the wearer. For best fit, measurements should be taken over the clothes worn under a protective suit.

If the physical measurements of the wearer are outside of the standard sizes listed, suits with custom measurements and design modifications are available upon request.

Fit: Due to the layers of insulation and technology involved in high temperature protection, the NXP Proximity, Kiln and Fire Entry suits are designed to fit loosely. Each suit size is designed to accommodate a range of personnel physical dimensions. Suit construction is based on standard measurements. Some variation in fabrication may occur.

Industries: Stand-By Operations in Oil Tankers, Offshore Drilling Wells and Platforms, Petrochemical and Refining, Military and Homeland Security, Ships, Power Generation, Steel, Lab and Testing Facilities.

NFPA 1851 recommends the mandatory retirement of Proximity (aluminized) suits 5 years after the date of manufacture. This does not mean the suit will or should remain in service the full 5 years. Early replacement may be required if the suit is damaged.